Standard Colours for Altair® Louvre Windows by Breezway®
PLEASE NOTE: These colours are indicative only and may not exactly reflect their true colour due to differences in screen calibration.
Our showroom has an extensive display of the options available for Altair® Louvre Windows by Breezway®. Here is an overview of the 3 frame options for your Altair Louvre Windows.
The Easyscreen frame:
The SL2 frame:
Louvre Component System (Galleries)
You can install the Altair Louvre galleries on their own into your own finished timber frame. Altair Weatherstrip is available for this option to make the window seal correctly and to comply with the Product Performance Warranty.
The Louvre Component System:
There are two blade heights to choose from. Choosing your blade height is like choosing the colour of your products. It comes down to personal taste and the look you are trying to achieve.
Control Method Choices
As well as choosing a control style, handle positions can be varied to allow windows of different sizes and at different heights to be matched or to allow handles to be moved lower or higher, left or right depending on the individual requirements.
Each handle can operate a maximum of 9 clips including at least one clip directly below the handle.
This page is still under construction. Please refer to our staff for information on installation methods for louvre windows.
Security for your Louvre Windows
Keylocks come standard on Altair® Louvres in Easyscreen® (131mm) or SL2® (52mm) frame. The louvre component system may be ordered with or without keylocks. Framed louvres can be ordered without keylocks.
The keylock is located on the opposite side to the handle. When the louvres are fully closed and the keylock is engaged, it increases the window’s locking pressure, further improving the air and water tightness.
Keylocks come in brushed chrome finish (pictured).
INVISI-GARD screens can be fitted to the Easyscreen (131mm) frame for a security option that allows you to feel secure to leave your windows open but still allows uninterupted views to the outside.
Read more about INVISI-GARD products.
Security Bars are available to fit into the Easyscreen (131mm) frame with 152mm blades.
Security bars do not impede the operation of the louvre window but provide and impenetrable barrier for thieves.
The Stonghold® System
Altair® Louvres with the Stronghold System have been designed to mechanically hold the blades in place. It improves blade retention and minimises the risk of the blades being dislodged. It is excellent to use in windows above 4m for safety.
To keep the blades in position, a pin is installed through the clip and glass. The insertion point is on the inside of the building making it almost impossible to remove it, or the blade from the outside.
The blades must be aluminium or toughened with the Stronghold System.